|
Bredal
K Range
|
     |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Bredal
manufacture a range of machines from the K40 with a capacity of
3 ton to the K135 with a capacity of 20 ton. All these machines
can be supplied with a large range of optional equipment to tailor
them so a specific task or environment.
|
|
|
K40 Approx 3ton fert / 4 ton lime The machine pictured is fitted with a hopper extension, roll over hopper cover, three speed floor belt drive, and 18-36m fertiliser kit. The half gear for headland spreading can also be seen on the end of the spinner box.
|
 |
|
K45 Approx 4ton fert / 5.5 ton lime Here the customer has specived the machine and hopper extension in stainless steel. and on 600/55 x 27.5 wheels.
|
 |
|
K65 Approx 5 ton fert / 7.5 ton lime This K65 is fitted with a hoppper cover and the 18-36m fertiliser kit.
|
 |
|
K85 Approx 7 ton fert / 10 ton lime The K85 pictured has been fitted with 18.4/15 x 38 this wheel tyre combination raises the height of the spinner box giving better clearance to prevent crop damage.
|
 |
|
K105 Approx 9 ton fert / 14 ton lime The LH 500 control box fitted to this K105 offers variable rate spreading and GPS control as well as simple calibration and monitoring of all key functions. The machine and extension have been manufactured in stainless steel and the hopper has been fitted with cut outs to accomodate the 800/65 x 32 tyres at a reasonable width. |
 |
|
K135 Approx 13.5 ton fert / 20 ton lime The rear axle of the K135 steers to reduce scrubbing and its load is spread over four Michelin 650/65 x 30.5 X Bib tyres. All these machines have the LH 500 control box which provides positive hydraulic drive to the floor belt. A hydraulic controlled tipping plate in the front of the hopper holds material off the belt until part of the load has been spread. |
 |
