|
 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Bredal
manufacture a range of machines from the K40 with a capacity of
3 ton to the K135 with a capacity of 20 ton. All these machines
can be supplied with a large range of optional equipment to tailor
them so a specific task or environment.
|
|||||||||||
|
K40 Approx 3ton fert / 4 ton lime The machine pictured is fitted with a hopper extension, roll over hopper cover, three speed floor belt drive, and 18-36m fertiliser kit. The half gear for headland spreading can also be seen on the end of the spinner box.
Click an image below to enlarge. |
 |
||||||||||
|
|||||||||||
|
K45 Approx 4ton fert / 5.5 ton lime Here the customer has specived the machine and hopper extension in stainless steel. and on 600/55 x 27.5 wheels.
Click an image below to enlarge. |
 |
||||||||||
|
|||||||||||
|
K65 Approx 5 ton fert / 7.5 ton lime This K65 is fitted with a hoppper cover and the 18-36m fertiliser kit.
Click an image below to enlarge. |
 |
||||||||||
|
|||||||||||
|
K85 Approx 7 ton fert / 10 ton lime The K85 pictured has been fitted with 18.4/15 x 38 this wheel tyre combination raises the height of the spinner box giving better clearance to prevent crop damage.
Click an image below to enlarge. |
 |
||||||||||
|
|||||||||||
|
K105 Approx 9 ton fert / 14 ton lime The LH 500 control box fitted to this K105 offers variable rate spreading and GPS control as well as simple calibration and monitoring of all key functions. The machine and extension have been manufactured in stainless steel and the hopper has been fitted with cut outs to accomodate the 800/65 x 32 tyres at a reasonable width. Click an image below to enlarge. |
 |
||||||||||
|
|||||||||||
|
K135 Approx 13.5 ton fert / 20 ton lime The rear axle of the K135 steers to reduce scrubbing and its load is spread over four Michelin 650/65 x 30.5 X Bib tyres. All these machines have the LH 500 control box which provides positive hydraulic drive to the floor belt. A hydraulic controlled tipping plate in the front of the hopper holds material off the belt until part of the load has been spread.
|
 |
||||||||||
|
|||||||||||
|
Turf Dresser Our standard turf dresser is based around the K40 machine, however any model can be adapted for this purpose. All hydraulic's are removed from the machine by using PTO power to drive both the disc's and floor belt. The disc's and vanes used are rubber coated for longer life. Click an image below to enlarge. |
 |
||||||||||
|
|||||||||||
|
Sand Conveyor The sand conveyor can be interchanged with the standard spinner box allowing the machine to be utilized for a wider range of purposes. Click an image below to enlarge. |
 |
||||||||||
|
|||||||||||
|
As can be seen below we supply hopper units to work with a wide range of self propelled vehicles. Please contact us for further details. Click an image below to enlarge. |
 |
||||||||||
|
|||||||||||
