|
KRM
Presses & Cultivators
|
     |
 |
 |
 |
 |
 |
 |
 |
 |
 |
|
Improve
workrates and overall efficiency with a KRM front
press or cultivator. Our cultivators
can be front mounted or used in combination with a seed drill
on ploughed ground or in a minimim tillage system.
|
|
|
Active Steering The uniqe active steering system used by KRM ensures sensitivity to changes in direction without the "jerky" movement of traditional passive steering systems. It also removes the need to pin the press in a fixed position before transport. |
 |
|
|
KRM Optipress The Optipress uses 45 degree 70cm cast press rings. It can be fitted with a single row of rigid ripper tines as shown, two rows of straight S tines or two rows of levelling tines. Standard equipment includes; heavy duty axle and bearings, self steering system, automatic self centering, parking stands and automatic hydraulic lock on all folding models in work and transport. |
|
|
KRM Megapacker The heavy duty design crushes clods and consolidates the seedbed to leave a uniform surface for following surface operations. Operating on a firmed soil reduces tractor wheelings and prevents sinkage to give higher work rates, saving time and money. Used in conjunction with a one-pass system these front linkage mounted machines provide a better balanced combination allowing the use of a smaller tractor for less compaction. |
|
KRM Optitilth Cultivator For use in plough based and minimum tillage. situations the KRM optitilth cultivator remains most popular. The usual configuration has a row of rigid ripper tines followed by two rows of straight S tines and either a steel or tyre packer. This machine provides levelling and consolidation of the seedbed ahead of the drill at a high forward speed and a low cost per acre.
|
|
|
KRM Maxitilth Cultivator The maxitilth cultivator has been developed for applications where there are large amounts of crop residue left on the surface. The Maxitilth features hydraulic leveling tines and wavey discs to chop and mix before being consolidated by the packer. Rigid ripper tines can also be fitted for inital loosening and wheel track eradicating. |
|
|
Front Mounting Kits Kits are available for front mounting both KRM cultivators and power harrows. The kit includes an A frame to reach between the tractor front linkage and the machines headstock. For a power harrow the kit also includes a longer PTO shaft with appropriate protection and a larger diameter through shaft. |
|
